Torque Monitoring Disable - Prevent Post-Tune Power Cuts
Disables or recalibrates the ECU torque monitor so a tuned engine does not cut power or derate.
The ECU continuously monitors engine torque and cuts power if it reads above the factory limits, a safety strategy that works fine on a standard car.
After Stage 1 or Stage 2 the engine makes more torque than that limit expects, so the monitor can interpret the higher figure as a fault and trigger a power cut, limp mode or a check-engine light. This is common on the VAG group and on DSG-equipped cars.
Torque Monitoring Disable safely deactivates or recalibrates that monitor so the higher torque is accepted as normal rather than flagged as an error. The tuned engine then runs cleanly at full power without derating.
It should be applied together with Stage 1 or Stage 2 tuning, as its purpose is to let the extra torque from those maps come through reliably. The change is prepared for your exact ECU and is fully reversible to stock.
Advantages & Features
- No power cuts after tuning
- Torque limits recalibrated
- Prevents post-tune limp mode
- Ideal for DSG-equipped cars
- Full, uninterrupted power
- Necessary companion to Stage 1 / Stage 2
- Fully reversible to stock
Related solutions
Price
Paid with credits from your account balance. The credit amount for your ECU is shown after the file is analysed, before you confirm. See credit packages
Frequently Asked Questions
What does Torque Monitoring Disable do?
It disables or recalibrates the ECU torque monitoring function that compares requested and actual torque. After a tune this monitor can see "too much torque" and cut power or trigger limp mode.
When do I need it?
If a tuned car intermittently loses power, derates or logs torque-plausibility codes after Stage 1 or Stage 2, especially on Bosch EDC17 and MED17 ECUs.
Which file do I need to upload?
A full read of the current (tuned) ECU file plus the original if available, and the fault codes seen.
How long does it take?
Typically 10-45 minutes when prepared by a tuner.
Is it reversible?
Yes, by flashing the original file back.
Is it safe to disable torque monitoring?
Torque monitoring is a safety layer. We recalibrate it to the tuned torque level wherever possible instead of removing it entirely, and it is intended for correctly tuned engines only.